Instruction manual: Cutting device for stoma base plates

Dimensions: Base area 120 x 120mm, Height 140mm with a weight of 800 grams.

The Cutting Device

Instruction manual for cutting stoma base plates

Attention, you have purchased a cutting device, use caution

and keep this device away from children.

 

The dimensions of our cutting device are 12x12 cm with a height of 15 cm.

The weight is only 800 grams

 

Please check whether the installed blade is identical to your stoma and your order. The diameter you require is indicated numerically on the blade. The correct diameter for you should be printed on the base plate. Depending on the manufacturer of the base plate, there may be slight deviations.

Now place the base plate on the wear plate and align the plate according to the marking on the stoma base plate. Now turn the spindle clockwise using the knob. Check the correct position again and then perform the cutting process with slightly increased force.

The cutting process is completed as soon as the blade has reached the wear plate without cutting the protective film. Now the spindle is turned counterclockwise until the finished plate can be removed. The blade is designed in such a way that the cut residue adheres to the protective foil. When the protective foil is removed, the residue is also removed. For stomas which could not be created circularly for medical reasons, we recommend our small diameters (21mm-26mm). This allows a different shape, for example an oval cut, to be made with several cutting passes. (Photo)

Maintenance of the cutting device

Maintenance, care and blade replacement

From time to time and depending on the use, the device should be cleaned. Cleaning is performed in the same way as for common household appliances knives and scissors. After cleaning, the thread of the spindle and the connection between the blade holder and the spindle should be lightly wetted with a resin and acid-free oil. If there is interest in an additional blade, the customer receives installation instructions and a tool which is necessary to change the blade with the delivery.